Solar panel cleaning methods compared, in California

There are only a few ways to clean solar glass, and they are not equal. Some are kind to the glass and its coating, some are quick but hard on the surface, and some simply move dirt from one place to another. This page compares them openly, so you can see why we use what we use.

Water-fed pole sections, soft brush heads, a plain filter tank, a hose and gloves laid out on a concrete patio

Compare any two approaches

Pick any two approaches below and the table shows how they differ in what they remove, how kind they are to the glass, how much water they use and when each one makes sense.

First approach
Compare with
Point of comparison Pure-water brush cleanWe use itPurified water through a long pole and a soft brush, then a clean rinse that dries without spots. Gentle soap washWe use itA small amount of mild, panel-safe soap worked in with the soft brush, followed by a full pure-water rinse.
What it removesValley haze, road dust, pollen and most dried bird spotsGreasy traffic film, sticky pollen, ash and soot film after smoke season
Kindness to the glassVery gentle. Soft bristles and plain water onlyGentle. Mild soap, soft brush, rinsed off completely
Water useModerate. A slow, steady flow of filtered waterModerate to more. Extra rinsing so no soap stays behind
When it fitsMost rooftop, backyard and patio-cover arrays, most of the timeGlass that still looks cloudy after a plain rinse and brush

All five, side by side

Three we use, two we keep away from solar glass. The bar shows how kind each approach is to the glass surface.

Pure-water brush clean

We use it

Our usual visit

Purified water through a long pole and a soft brush, then a clean rinse that dries without spots.

Removes
Valley haze, road dust, pollen and most dried bird spots
On the glass
Very gentle. Soft bristles and plain water only
Water
Moderate. A slow, steady flow of filtered water
Fits
Most rooftop, backyard and patio-cover arrays, most of the time

Gentle soap wash

We use it

For stubborn film

A small amount of mild, panel-safe soap worked in with the soft brush, followed by a full pure-water rinse.

Removes
Greasy traffic film, sticky pollen, ash and soot film after smoke season
On the glass
Gentle. Mild soap, soft brush, rinsed off completely
Water
Moderate to more. Extra rinsing so no soap stays behind
Fits
Glass that still looks cloudy after a plain rinse and brush

Light rinse

We use it

Between visits

Purified water only, no brushing, to lift loose dust that has not baked on yet.

Removes
Loose dust and fresh pollen that has not stuck
On the glass
Very gentle. Nothing touches the glass but water
Water
Low. A short pass over each row
Fits
A quick refresh in a recurring schedule, or a lightly dusty array

Pressure washer

We avoid it

We never use it on panels

A high pressure jet aimed at the glass and frame.

Removes
Loose dust, but it tends to push grime into edges instead of lifting it
On the glass
Harsh. Force on the glass, seals and frame edges
Water
High. A lot of water in a short time, often tap water that leaves spots
Fits
Not for panels. We keep pressure washers off solar glass

Stiff brush or scraper

We avoid it

We keep it off the glass

A hard bristle deck brush, a scouring pad or a blade on dry or lightly wet glass.

Removes
Spots, but drags grit across the surface while it does
On the glass
Harsh. Grit under hard bristles can mark the coating
Water
Low, which is part of the problem: grit is scrubbed instead of floated
Fits
Not for panels. Our brushes are soft and our water does the work

Why purified water

Tap water in the valley carries dissolved minerals. When it dries on dark glass in the sun, those minerals stay behind as white spots and rings, which is why a quick hose rinse often looks worse a day later. Purified water, filtered through deionizing resin on our cart, has almost nothing left in it to leave behind.

Because it dries clear, purified water lets us rinse without towels or squeegees on the glass. Fewer things touch the surface, and the finish stays even from row to row.

Why soft brushes

Our brush heads have soft, flagged bristles that hold water and float grit away. They are sized for the pole so we can reach the far rows from a safe footing. We rinse the brush often during a visit, so the bristles stay clean as they move across the glass.

Why cool morning hours

In summer, panel glass in the sun can be hot to the touch by late morning. Water evaporates almost as soon as it lands, soap can dry before it is rinsed, and the brush has no time to work. Starting early, while the glass is still cool, gives a clear, even result and a safer roof to stand on.

How we stay safe up there

On roofs we wear a harness, set the ladder on a stabilizer and pick our footing on the roof surface, never on the panels. A long water-fed pole means we can reach the far edge of an array without leaning over it. If a roof is too steep, too fragile or too wet for a safe footing, we say so and clean what can be reached safely. We ask homeowners to leave the roof to us, and to keep children and pets clear of the work area while we are up there.

Questions about method

More answers on the questions page.

Is a light rinse enough on its own?

For loose dust between visits, often yes. Once a layer has baked on or turned sticky, a brush clean is needed to lift it.

What kind of soap do you use?

A mild, panel-safe soap without harsh chemicals, in small amounts, and only where plain water and brushing are not enough. Every bit of it is rinsed off with purified water.

Does rain clean the panels?

Light rain mostly moves dust around and can leave spots as it dries. Heavy winter rain helps a little, but pollen, bird spots and film usually stay.

Can I spray my panels with a hose between visits?

From the ground, a gentle rinse of a ground or patio array does no harm, though tap water may leave spots. Please leave roof arrays to people with the right safety gear.

Want the gentle method on your roof?

Tell us where the panels are and what has settled on them. We suggest the visit that fits and set a cool morning for it.