Ground-mount and backyard array cleaning in California
An array on a frame in the yard is easy to reach and quick to get dirty. Wind lifts soil from the beds, sprinklers spot the lower rows and leaves collect along the bottom edge. We clean it from the ground, row by row, and leave the garden as we found it.

What a backyard visit covers
We start with the bottom edge of each row, where leaves, soil and dried grass tend to gather against the frame. That debris is cleared by hand first, so the rinse does not turn it into mud on the glass. Then each panel is brushed with purified water and rinsed from the top edge down.
Ground arrays often carry hard water marks from nearby sprinklers. Purified water and patient brushing soften most of these. Where they hold on, we work in a mild soap and rinse it off completely, and we let you know if a sprinkler head is aimed at the panels so you can turn it.
Yards we see in the valley and the foothills
Hillside lots near the foothills and older properties with orchards often have room for an array in the yard instead of on the roof. Many sit among avocado, citrus and olive trees, with gravel or dry grass underneath. We keep our hose lines on paths, avoid planted beds and watch where the rinse water runs.
Some properties have more than one row or a larger array for a barn, a workshop or a small farm stand. We clean those too, as long as the array is a home or small property size and not a large commercial field.
Before the visit
Please turn off sprinklers near the array the evening before, keep pets inside and leave the gate unlocked if you will be out. Tall weeds along the frame can stay; we simply work around them.
Questions about this visit
Something else on your mind? See all questions or call us.
Why do ground arrays get dirty faster?
They sit closer to soil, plants and sprinklers. Wind carries dust from beds and paths straight onto the lower rows, and sprinkler water dries into spots.
Will the rinse water hurt my plants?
No. Purified water is plain water with the minerals filtered out. When we use a little mild soap, it is a small amount and fully rinsed.
Do you clear weeds under the array?
We clear leaves and loose debris from the panel edges and frame. Yard care under the array is not part of our visit.
Can you clean an array on a slope?
Usually, yes. We set our footing on the ground and use a shorter pole. If a slope is unsafe to stand on, we explain what we can reach before we start.
How long does a backyard visit take?
Most home arrays take a morning or less. Larger or dustier arrays take longer, and we tell you the expected time when we confirm the visit.
Ready for clear glass?
Tell us where the panels sit and what you see on them. We reply during office hours and set a morning that suits you.

